Dr. Dabber Light Atomizer is the replacement atomizer for the Dr. Dabber Light wax pen. It uses a titanium coil wrapped around a glass wick, the low-heat titanium design Dr. Dabber built the Light around for full-melt concentrates, and runs at the Light's one heat setting of 550 to 650°F. It screws onto the Light battery under the mouthpiece, and one atomizer lasts about 4 to 12 weeks, depending on use. Currently on sale at Inline Vape, reduced from $12.99 to $9.99.
How It Works:
- Unscrew the mouthpiece, then unscrew the old atomizer from the Light battery.
- Screw the new atomizer onto the battery and put the mouthpiece back on.
- Load a small amount of concentrate, about the size of a grain of rice.
- Press the button to heat. The Light has one setting, 550 to 650°F, so there is nothing to adjust.
Specs:
- Type: replacement atomizer (coil) for the Dr. Dabber Light
- Coil: titanium wire wrapped around a glass wick
- Heat: the Light's one setting, 550 to 650°F
- Made for: full-melt concentrates
- Connection: screws onto the Light battery
- Life: about 4 to 12 weeks, depending on use
In the Box:
- 1 Dr. Dabber Light atomizer
What It Works With:
Made for the Dr. Dabber Light wax pen; the kit comes with one spare top, so this is the part to buy when that wears out. Have a Dr. Dabber Boost or Boost Evo instead? See the Boost Coils and Quartz Nail or the Boost Evo Quartz Atomizer. Browse all our wax and dry herb coils.
Best For:
- Light owners replacing a worn or burnt atomizer
- Keeping a spare on hand
- Low-heat sessions with full-melt concentrates
FAQ
Q: What does the Dr. Dabber Light Atomizer fit?
A: The Dr. Dabber Light wax pen.
Q: Is this the Dr. Dabber Light coil?
A: Yes. The barcode label on the box calls it the Light Coil, and the box itself says atomizer. It's the same part.
Q: What is the coil made of?
A: Titanium wire wrapped around a glass wick.
Q: How long does an atomizer last?
A: About 4 to 12 weeks, depending on how often you use it and how you look after it.
Q: How do I clean it?
A: Unscrew the mouthpiece and the atomizer, then soak the atomizer in isopropyl alcohol for 20 to 30 minutes. Don't leave it in longer, because that can damage the rubberized finish on the outside. Let it dry, screw it back on, and press the button for 1 to 2 seconds before loading.
Q: Where can I buy the Dr. Dabber Light Atomizer?
A: At Inline Vape, online and at our Michigan shops.
Summary: The Dr. Dabber Light Atomizer is the titanium-coil, glass-wick replacement atomizer for the Dr. Dabber Light wax pen, running at the Light's 550 to 650°F setting. On sale for $9.99 at Inline Vape, online and at our Michigan shops.
